GRASS VALLEY XIP-3901 User Manual Download Page 277

Page: 277 / 308

277

XIP

3901

User Manual

Contribution

Apart from the

Global

alarms, click a

Contribution

column item to set the severity level of

each individual alarm to the alarm named in the column heading. This applies to the front

card -edge LED and to the alarms reported to GV Orbit. See

Front Card-edge Interface

, on

page 35.

Black icon:

The alarm makes no contribution.

Yellow icon:

The alarm is of minor importance (warn).

Red icon:

The alarm is of critical importance (fail).

Card Led

This shows the current status of the status LED located on the front card-edge. If at least

one Critical or Fail alarm is triggered, the LED will change to red. If no Fail alarms are

triggered and Warn alarms are occurring, the LED will change to yellow.

Rear

These are the card’s master alarms.

Overheat
Fan Failure
Hardware

Failure
Network

These are alarm categories. Expand the category to see the available alarms.

PTP
NMOS

Receivers

Senders
Inputs /

Outputs
Test

Property

Description

Summary of Contents for XIP-3901





















































































































































































































































































































Search results

Summary of Contents for XIP-3901

Reviews:

Brands by name

Popular brands

GRASS VALLEY XIP-3901, User Manual

Search results

Summary of Contents for XIP-3901

Reviews:

Brands by name

Popular brands