GRASS VALLEY KARRERA K-FRAME, Installation & Service Manual

Page: 250 / 278

250 KARRERA K-FRAME — Installation & Service Manual
Section 7 — Maintenance
7. When finished, the Ghost window will close by itself.
• A VP Frame CF card will now contain a set of files making it a
SWUP bootable image. These files can be seen by the Windows OS.
• The Control Panel CF card now has a Linux O/S that can boot the
Control Panel. These files are not visible to the Windows OS.
CAUTION Do Not format CF cards using Windows.
Neither CF card contains Karrera release software yet. Proceed with the
appropriate update process described below.
Updating System Software on a New Control Panel CF Card
1. Remove the CF card from the reader, power down the Control Panel,
install the CF card in the Control Panel’s processor, and power up the
panel.
2. Follow the normal software update process, except the Control Panel
will be identified as
Unknown / Panel
in the K-Frame Switcher Installer
application program hierarchy.
Restore Control Panel Configuration Files
After installing the K-Frame release software, you can now reload a Show
file containing the Eng Setups and User Setups for your system, or reload
these configuration files individually.
You will also need to enter the Node Settings information. Go to
Eng Setup
,
Nodes Settings
, and enter the IP address and device name information in the
Control Surfaces and Frame Suite Nodes & ID tabs.