GRASS VALLEY KARRERA K-FRAME, Installation & Service Manual

Page: 215 / 278

KARRERA K-FRAME — Installation & Service Manual 215
Router Interface
Configuring a GV Switcher Router
Setting IP Addresses
The Eng Setup Router menu is used to set the IP Address(es) the Karrera K-
Frame system will use to communicate to the external routing system. The
external routing system can have an optional redundant, or secondary, con-
troller which takes over should the primary fail. Both router control
systems will require their own IP address settings.
Touch
Eng Setup
,
Router
selection button to go to this menu ( Figure 154 ).
Figure 154. Eng Setup Router Menu
The
Status
indicator is red when communication is not detected, and goes
green when communication is established.
To Set the IP Addresses:
1.
Touch the
Primary IP
data pad and enter the primary address of the
router with the pop-up keypad.
2.
Touch the
Secondary IP
data pad and enter the secondary IP address of
the router, if appropriate. If the router has only one control system,
leave this address set to the blank default.