GRASS VALLEY KARRERA K-FRAME, Installation & Service Manual

Page: 116 / 278

116 KARRERA K-FRAME — Installation & Service Manual
Section 5 — Basic Configuration
nents. This is accomplished by registering those addresses with the Frame
using the GV Switcher menu application Node Settings menus.
Menu Panel Registration
Registering the Karrera K-Frame Menu Panel (or PC running the GV
Switcher menu application) with the Frame was described earlier (see
Establishing Menu to Frame Communication on page 101 ). The GV Switcher
menu application needs to be in communication with the Video Processor
Frame before other nodes can be registered.
Control Panel Registration
1.
Touch
Eng Setup
,
Node Settings
,
Control Surfaces
( Figure 80 ).
Figure 80. Control Surfaces Menu
2. Touch an available set of buttons and enter a Node Name and the IP
address of the Control Panel.
3. You can assign the component to a suite and control surface now if you
wish, but it is recommended to initially configure your Karrera K-
Frame system as a single suite. Later, you can modify the configuration
for multi-suite operation.