GRASS VALLEY KARRERA K-FRAME, Installation & Service Manual

Page: 117 / 278

KARRERA K-FRAME — Installation & Service Manual 117
Registering Karrera K-Frame System Nodes
4. If you want that Control Panel button DPOPs (Double Press Open)
button to affect this Menu Panel, touch
Frame Suite Nodes & ID
and enter
the IP address of that Control Panel in the Track DPOPs from Panel ID
field (see
Figure 64 on page 102 ).
5. After making an addition or change, you will need to reset the Control
Panel. This can be done two different ways:
• On the Control Panel Multi-Function Module access the Home
menu, then press
Panl
,
IP
,
Boot
and press
Yes
.
Remote Aux Panel Registration
Note Do not confuse the Local Aux Panel, which is considered a Control Panel
Stripe, with Remote Aux Panels, which are small panels used to change Aux
Bus sources from a different location. The Local Aux Panel Stripe is not con-
figured with the following menus.
1. Touch Eng Setup , Node Settings , Remote Aux IP Network ( Figure 81 ).
Figure 81. Remote Aux IP Network Menu
2. Touch an available set of buttons and enter an Aux Panel Name and IP
address of each Aux Panel.
3. Identify the type of Remote Aux Panel (Single or Multi- Destination).