GRASS VALLEY KARRERA K-FRAME, Installation & Service Manual

Page: 128 / 278

128 KARRERA K-FRAME — Installation & Service Manual
Section 5 — Basic Configuration
2. Select the appropriate Output Type:
• Select
Fixed
if the output is to be dedicated. Later you will be able to
select from either Logical Sources or Fixed Sources for that output.
• Select
Switched PVW
if the output will be used for switched preview.
Switched preview can be assigned to multiple outputs.
• Select Aux if the output will be an Aux bus (see Aux Bus Configuration
on page 128 for more information).
3. The
Suite 1
and
Suite 2
buttons are used to assign the currently selected
output to a suite. The default setting is
Suite 1
.
4. Touch the button of the desired item for the selected output connector
from the list on the right. The change is immediate, and can be viewed
on a connected monitor. (Switched Preview mode does not offer any
output sources to select from).
5. If desired, touch the
Output Name
data pad to change the name of the
output using the pop up alphanumeric keypad or standard keyboard.
This name appears on the data pad of the scrolling list on the left. Up to
12 characters can be entered.
Aux Bus Configuration
Aux buses can be used to send dynamically selected sources to an output.
Aux bus sources are selected using the Local Aux panel, delegating an ME
for Aux Bus control, or using Remote Aux Panels delegated to control that
Aux bus.
The number of Aux buses on a Karrera K-Frame system varies, depending
on how the physical outputs have been mapped. Any output that is not
configured as Fixed or Switched Preview is available for use as an Aux bus.