GRASS VALLEY KARRERA K-FRAME, Installation & Service Manual

Page: 247 / 278

KARRERA K-FRAME — Installation & Service Manual 247
Creating Compact Flash Cards
onto each card. System configuration information will also need to be
reloaded and/or re-entered after CF card replacement to restore normal
system operation.
Materials Required
To format a K-Frame Control Panel CF card you will need:
• A CF card reader/writer (USB 2.0 recommended),
• PC, or Menu Panel equipped with a mouse and keyboard,
• K-Frame Switcher Installer application program deployed onto the PC
or Menu Panel, and
• GV Switcher release software.
After creating new CF cards, you will need the following to restore your
system to full operation:
• Backup system configuration files (a Show file, or a set of Eng Setups
and User Setups files), and
• Node Settings information (IP addresses and names of all system com-
ponents). This may be written notes, screen shots, or a spread sheet.
This information is not saved to configuration files.
CF Card Formatting Procedure
1. Connect the CF card reader/writer to the USB port of the PC or Menu
Panel and insert the CF card into the reader/writer.
2. Launch the K-Frame Switcher Installer program.