GRASS VALLEY KAHUNA 6400 Installation Manual Download Page 87

Page: 87 / 119

Kahuna

Installation Manual

Mav Remote External Power Supplies

The MAV Remote is supplied with 2 external 12V power supplies. One of the power supplies
powers the Mav Remote, the other is for redundancy.

The Power Supplies have NO user serviceable parts inside and are welded shut.



Do not attempt to open the power supply cases.



The power supply connector plug that connects to the Mav Remote is a 4 pin “Snap and Lock”
type, care should be taken when connecting and un-connecting from the Mav Remote.



Snap and Lock type connector

Note:

Make sure that the mains power is turned

Off

before connecting the

PSU to the Mav Remote.

Note:

Do not allow the power supplies to hang freely from the Mav Remote.

Make sure that the cables are not under any stress.

Summary of Contents for KAHUNA 6400
























































































































Search results

Summary of Contents for KAHUNA 6400

Reviews:

Related manuals for KAHUNA 6400

Brands by name

Popular brands

GRASS VALLEY KAHUNA 6400, Installation Manual

Search results

Summary of Contents for KAHUNA 6400

Reviews:

Related manuals for KAHUNA 6400

Brands by name

Popular brands