manualshive.com logo in svg

GRASS VALLEY KAHUNA 6400, Installation Manual

Share
Download
GRASS VALLEY KAHUNA 6400 Installation Manual Download Page 81

 63

Positioning the MAV and Blank Modules

MAV Modules

Kahuna Maverik is a completely modular control surface, this means that the user is able to 
change the layout of the control surface to suit any user preference or production 
environment. The MAV modules can be easily lifted out of the MAVRow frame and be placed in 
any configuration the user wishes.

With the MAVRows and Comms cables now fitted into the MAVRow frame, the next step is to fit 
the MAV modules into the MAVRow. 

Fitting the MAV modules into the MAVRow is a simple process, there are four locating pegs on 
the underside of each MAV, the pegs slot into keyway holes on horizontal rails in the MAVRow. 

Note:

Care should be taken when handling MAV modules not to damage 

the surface edges. Do Not apply any force to the control knobs on the GUI-
MAV or buttons on MAV modules.

Note:

Connecting the Comms cables, Network cables and the external 

PSU’s to the MAVs/MAV-GUI is covered in the previous section of this manual.

Locating Pegs

Locating Pegs

Locating Pegs

Under Side of
MAV

MAVRow viewed from above

Keyway Holes

Summary of Contents for KAHUNA 6400
























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands