15
Environment and Location
Environmental Considerations
The ambient temperature for all the supplied equipment should not exceed the limits of 5 and
40
°
C (41 to 104
F) at a relative humidity of 10 to 90% (non-condensing).
Installing the equipment in a clean environment with moderate temperature and humidity will
promote a long and trouble-free equipment life.
Assembling the MAVRow’s
The number of MAVRows that have to be assembled will depend on the size of the control
surface ordered. A single row of MAV modules will not need any assembly, more than one row
will need fixing together before mounting into a desk.
The MAVRows have a spacer bar between them and are secured to the spacer bar using the
supplied screws.
When attaching the MAVRow frames to the spacer bar, the screws have to be offset (as shown
in the diagram below).
With the MAVRows assembled, they can now be mounted into the desk.
Note:
If a control surface is going to be built with MAV rows of different
lengths. The right hand ends should be either aligned or offset from each
other by a multiple of 60 mm (2.36 inches).
Spacer Bar
Screws secure the
MAVRows frames to the
Spacer bar.
Single MAVRow
The screws have to be
offset.
