GRASS VALLEY K2 BASECAMP EXPRESS, Instruction Manual

Page: 350 / 394

350 K2 Storage System Instruction Manual July 3, 2007
Chapter 11 Administering and maintaining the K2 Storage System
Overview of Storage Utility
The Storage Utility user interface includes a tree view in the left-hand pane, and a
status information area displayed in the right-hand pane. The tree view displays the
hardware that make up the RAID storage system connected. The context menus in the
tree view are used to configure storage. The right-hand status pane displays
information about the item selected in the tree view. The tree view hierarchy is as
follows:
Controllers in device
- Provides a logical grouping of the RAID Controllers in a
primary RAID chassis.
Controller
- Represents the RAID Controllers found. These are numbered in the
order discovered. The controller icon represents both RAID Controller A and, if
installed, RAID Controller B. To determine if an optional RAID Controller B is
installed, select the Controller icon in the tree view, then examine the status pane
for peer status.
Bound LUNs
- Expanding the Bound node displays all bound LUNs.
LUN
- Represents a bound LUN. Expanding the LUN node displays the disk
modules that make up the LUN.
UnBound disks
- Expanding the UnBound node, displays all unbound disk
modules.
Disks
- Represents the disk modules.
The Storage Utility detects disks available and lists them on the opening screen.
Refer to the following procedures to use Storage Utility for maintenance and
configuration tasks
Controllers
in device
Controller(s)
Bound LUNs
LUN
Unbound Disks
Disks
Status area
(displays status of
the selected item)