GRASS VALLEY K2 BASECAMP EXPRESS Instruction Manual Download Page 366

Page: 366 / 394

366

K2 Storage System Instruction Manual

July 3, 2007

Chapter 11 Administering and maintaining the K2 Storage System

Before restoring the database, take the K2 Storage System offline and take the media
file system/database server or servers out of service. Refer to

“Taking a K2 Media

Server out of service” on page 334

. There must be no connections to the media

database and Failover Monitor must be off.

If you have a redundant K2 Storage System, restore the database to the K2 Media
Server that is the primary media file system/database server.

1. From the K2 Media Sever Windows desktop, click

Start | Programs | Microsoft SQL

Server | Enterprise Manager

. Enterprise Manager opens.

2. In Enterprise Manager, expand the tree view as follows:

Microsoft SQL Servers | SQL Server Group | (local) | Databases

3. In the Enterprise Manager tree view, right-click the

Databases

node and select

All

Tasks | Restore Database

. The Restore database dialog box opens.

4. In the Restore Database dialog box, in the

Restore as database

drop-down list, type

the following:

media

5. In the Restore Database dialog box, select

From device

6. In the Restore Database dialog box, click

Select Devices

. The Chose Restore

Devices dialog box opens.

7. In the Chose Restore Devices dialog box, select

Disk

and then click

Add

. The Chose

Restore Destination dialog box opens.

8. In the Chose Restore Destination dialog box, select

File name

and then click the

…

button. The Backup Device Location dialog box opens.

9. Browse to and select the backup file, then click

. The Backup Device Location

dialog box closes and reveals the Choose Restore Destination dialog box.

10.In the Choose Restore Destination dialog box, click

. The Choose Restore

Destination dialog box closes and reveals the Choose Restore Devices dialog box.

Summary of Contents for K2 BASECAMP EXPRESS











































































































































































































































































































































































































Search results

Summary of Contents for K2 BASECAMP EXPRESS

Reviews:

GRASS VALLEY K2 BASECAMP EXPRESS, Instruction Manual, Page: 366 / 394

Search results

Summary of Contents for K2 BASECAMP EXPRESS

Reviews: