The device restarts. This restart is required by the Aurora Playout software
uninstall.
Deployment tasks run and software is installed. Progress is reported and next
steps are indicated in both the Status and Details columns.
7. When the Status or Details columns indicate next steps, identify the software in
the row, then do one of the following:
•
For K2 software, when Details displays a
Restart required
link, click the link
and when prompted "...are you sure...", click
Yes
.
The device restarts.
8. Monitor progress as indicated by both the Status and Details column. When finished,
the Status column indicates complete.
Upgrade NAS systems
Prerequisites for this task are as follows:
•
K2 systems are upgraded to the compatible version of K2 system software.
•
Aurora Edit, Ingest, and Playout systems are upgraded to the compatible versions
of software.
Upgrade the MediaFrame Proxy NAS (K2 Nearline SAN) to the compatible version
of K2 software. Use SiteConfig and deploy software, using steps similar to those
for other systems.
a) Check software on the Nearline SAN's K2 Media Servers.
b) Add software
*.cab
file to the deployment group that contains the K2 Media
Servers.
c) Upgrade software on K2 Media Servers via a SiteConfig deployment session.
Upgrade Browse and MediaFrame systems
Prerequisites for this task are as follows:
•
K2 systems are upgraded to the compatible version of K2 system software.
•
Aurora Edit, Ingest, and Playout systems are upgraded to the compatible versions
of software.
•
K2 Nearline SAN (NAS) systems are upgraded to the compatible version of K2
system software.
Upgrade your Browse and MediaFrame systems to the compatible versions of
software. Refer to Aurora Browse Release Notes for procedures.
18
Aurora Playout Version 7.1.0 Release Notes and Upgrade Instructions
18 October 2010
Upgrading Aurora Playout systems
