![GRASS VALLEY AURORA PLAYOUT - S AND UPGRADE INSTRUCTIONS V7.1 Upgrade Instructions Download Page 35](http://html.mh-extra.com/html/grass-valley/aurora-playout-s-and-upgrade-instructions-v7-1/aurora-playout-s-and-upgrade-instructions-v7-1_upgrade-instructions_2257867035.webp)
Known Issues
The following limitations are present in this release of software. If you wish to obtain
more information about these limitations, please mention the reference numbers.
Aurora Playout
If Aurora Playout doesn't play all the way through your playlist
when using the Archive Play feature, there may be a problem
with the black clip that is used as filler between clips.
Description:
CR42885
Make sure that you have a clip called “BLACK” (all
uppercase) in the same bin on the Media Server where you
Workaround:
send stories for playout (normally the “default” bin). One way
to create this clip is to insert 10 seconds of filler into an
otherwise empty Aurora Edit sequence and send it to the
playout bin.
A K2 version 3.2 playout system supports a maximum of only
eight channeless AMP connections at one time (this is separate
from the channeled connections that are used for playback).
Description:
CR68152
Make sure only eight channeless AMP connections are
activated at a time. So, for example, only one SDB Server
Workaround:
connection and seven Housekeeper connections to a K2 can
be configured at a time.
Problems with updating the Ready status of clips.
Description:
CR68611
More than one Aurora Playout system should not be configured
to connect to the same channel on a K2 as this can cause
problems with updating the Ready status of clips.
Workaround:
When installing Aurora on Windows 7 clients, a pending
SiteConfig dialog can be missed.
Description:
PR20458
When a dialog is pending, a blinking icon displays on the
Windows 7 task bar. Clicking on this indicator brings up the
Workaround:
dialog that takes you to the isolated session. If you are logged
in via remote desktop, the interactive services detection service
sends a notification about the pending dialog. If the notification
has been missed, go into Windows Services and stop and
restart the Interactive Services Detection Service. This causes
the service to send an immediate notification about the pending
dialog.
MediaFrame
There is no Clear Points function in the MediaFrame Clip
Viewer of ALP and Playlist.
Description:
CR91630
To reset trimmed clips back to the original mark in and mark
out, you must manually move the new mark in and out back
Workaround:
18 October 2010
Aurora Playout Version 7.1.0 Release Notes and Upgrade Instructions
35