manualshive.com logo in svg

GRAPHTEC CELITE-50, User Manual

The Graphtec Celite-50 is an efficient and reliable cutting plotter suitable for various applications. This user-friendly machine comes with a detailed user manual for easy setup and operation. Download the manual for free at manualshive.com and get started with precision cutting today.

Share
Download
background image

2-3

Chapter 2  Basic Operations

Setting the Tool

To attach the tool, insert the tool into the tool holder completely, and then fix the tool by the locking lever.

 CAUTION

•

 Don't touch to the tool while it is moving, it is extremely dangerous.

•

 Be careful not to injure yourself with the cutter blade when setting the tool.

 1.

  Pull the locking lever to open the lock.

Locking Lever

Locking 

indicator

Lock

Unlock

 2.

  Insert the cutter pen to the tool holder while holding it.

Locking Lever

 3.

  Push the locking lever until it clicks to hold the cutter pen. 

Confirm the locking indicator became the white.

Locking Lever

Locking 

indicator

Lock

Unlock

Click

 4.

  Pull the locking lever to open the lock, and then remove the 

cutter pen from the tool holder.

Locking Lever

Summary of Contents for CELITE-50

































































































































Reviews:

No comments

Related manuals for CELITE-50

Brands by name

Popular brands

Load more brands