Graphic Products DuraLabel 7000, User Manual

Page: 6 / 32

6
4 3
5
2.2 Equipment Checklist
•
The DURALABEL 7000 thermal transfer printer unit with cutter
•
Ribbon paper core
•
Power cord
•
CD with printer driver and label templates
•
USB cable
If any parts are missing, please contact the Graphic Products customer
service department.
3. Setting up the Printer
3.1 Connecting the Printer
1. Place the printer on a flat, secure surface near the computer it
will be working with.
2. Make sure the power switch is OFF.
3. Connect the DuraLabel 7000 to the printer with the RS-232 or
USB cable.
4. Plug the power cord into the power supply connector on the rear
of the printer; plug the opposite end of the cord into a properly
grounded outlet.
3.2 Install Using USB Cable
Important! You must have IT administrator privileges in order to install
driver.
A Found New Hardware dialog box may appear. If so, select
No, not
this time .