Graphic Products DuraLabel 7000, User Manual

Page: 21 / 32

21
The following combinations of buttons produce these results:
Item Button Beep LCD Message Description
Self Test
Feed +
Power on
3 beeps Self Test
Press and hold
FEED button and
turn on the printer
until the buzzer
beeps 3 times.
Dump Mode
Feed +
Power on 3 beeps

1 beep
Now in Dump
Mode
After entering Self
Test Mode, keep
holding FEED
button until the
buzzer beeps once.
Auto Sensing
Pause +
Power on
3 beeps
Auto Sensing
Mode
Press and hold
PAUSE button and
turn on the printer
until the buzzer
beeps 3 times.
Go to Default
FEED +
Power on
2 beeps
twice
Go to Default
Press and hold
FEED & CANCEL
buttons and turn on
the printer until the
buzzer beeps 2
times. The printer
setting will go to
default.
Setting Mode PAUSE 3 beeps Setting Mode
With the power on,
press and hold
PAUSE button 3 to
4 seconds until 3
beeps.
6.1 Self-Test
The Self-Test function allows users to check that the printer is operating
properly. In Self-Test Mode, the printer will produce a test label when the
FEED button is pressed
To start a self-test:
1. Turn the printer off, then press and hold both the FEED button while
turning the power switch on.
2. Release the FEED button after hearing 3 beeps.
3. The printer will automatically produce a test strip that shows the
internal printer settings. The LCD display screen will indicate “Self
Test.” These results indicate the printer is functioning properly.