Graphic Products DuraLabel 7000, User Manual

Page: 26 / 32

26
Keyboard Setup
Default: US
US, UK, French, German, Spanish, Italian, Finnish,
Dutch, Belgian
Keyboard Mode
Default: Recall Label
Recall label from memory card.
Keyboard Setup
:
Setting the keyboard.
Code page Setup
:
Setting the code page.
Printing Option: Set the print quantity.
Clock Setup: Set the clock and clock display.
Exit KB Mode
:
Exit PS2 KB Mode.
Buzzer Setup Default: ON OFF
Smart Backfeed
Default: ON This function must install stripper or
cutter. OFF
Password
Default: OFF
ON:
When password protect is enabled, the
password is required for entering Setting Mode.
Top of Form
Default: ON
ON:
Start each printing from the Top-of-Form
position. OFF
Ethernet
Go to default: Set the IP address of Ethernet module
to factory default setting.
Preview Preview and check all settings.
Note: The DuraLabel 7000 will store those settings that were last used before it is
turned off. If settings are to be changed when the printer is turned on again, enter
into Setting Mode to reset.
6.8 Printer Specifications
Resolution 203 dpi (8 dot/mm)
Print Mode Thermal Transfer / Direct Thermal
CPU 32 Bit
Memory 4MB Flash, 16MB SDRAM
Print Speed 2 IPS
Print Length Min 13mm (0.51”), Max 3000mm (118”)
Print Width 168 mm (6.61”)