GAC2570 User Manual
Version 1.0.1.23
P a g e
|
156
Advanced Network Settings
Advanced Network Settings
Preferred DNS 1
Sets the preferred DNS server 1 for the user.
Preferred DNS 2
Sets the preferred DNS server 2 for the user.
Enable LLDP
Enables the LLDP (Link Layer Discovery Protocol) feature on the device.
If it is set to “Yes”, the device will broadcast LLDP PDU to advertise its
identity and capabilities and receive same from a physical adjacent layer 2
peer. The default setting is "Yes".
LLDP TX Interval (s)
Configures the interval the device sends LLLD-MED packet.
The default setting is 30s.
Note
: Reboot the device to make changes take effect.
Enable CDP
Configures whether to enable CDP to receive and/or transmit information
from/to CDP-enabled devices. The default setting is "No".
Layer 3 QoS for SIP
Defines the Layer 3 QoS parameter for SIP. This value is used for IP
Precedence, Diff-Serv or MPLS. The default value is 26.
Layer 3 QoS for Audio
Defines the Layer 3 QoS parameter for RTP. This value is used for IP
Precedence, Diff-Serv or MPLS. The default value is 46.
HTTP/HTTPS User-
Agent
Sets the user-agent for contacts.
Note
:
Reboot the device to make changes take effect.
SIP User-Agent
Sets the user-agent for SIP. Default is: Grandstream GAC2570 $version
Proxy
HTTP/HTTPS Proxy
Hostname
Specifies the HTTP/HTTPS proxy hostname for the device to send packets
to. The proxy server will act as an intermediary to route the packets to the
destination.
HTTP/HTTPS Proxy Port
Specifies the HTTP/HTTPS proxy port for the device to send packets to.
The proxy server will act as an intermediary to route the packets to the
destination.
Bypass Proxy For
Defines the destination IP address where no proxy server is needed.
The device will not use a proxy server when sending packets to the
specified destination IP address.
System Settings Page Definitions
Time & Language Settings
Time Settings