Grandstream Networks GAC2570 User Manual Download Page 137

Page: 137 / 177

GAC2570 User Manual

Version 1.0.1.23

P a g e

137

Session Timer

Enable Session Timer

Allows the device to use the session timer, when set to “Yes”, it will be

added in the SIP INVITE message to notify the server.

Session Expiration (s)

Configures the device’s SIP session timer. It enables SIP sessions to be

periodically "refreshed" via a SIP request (UPDATE, or re-INVITE). If there

is no refresh via an UPDATE or re-INVITE message, the session will be

terminated once the session interval expires.

Session Expiration is the time (in seconds) where the session is considered

timed out, provided no successful session refresh transaction occurs

beforehand.

The default setting is 180. The valid range is from 90 to 64800.

Min-SE (s)

Determines the minimum session expiration timer (in seconds) if the device

act as a timer refresher. Default is 90. The valid range is from 90 to 64800.

UAC Specify Refresher

Sets which party will refresh the active session if the device makes

outbound calls. If it is set to “UAC” and the remote party does not support

Refresher feature, the device will refresh the active session.

If it is set to “UAS”, the remote party will refresh it. If it is set to “Omit”, the

header will be omitted so that it can be selected by the negotiation

mechanism. The default setting is "Omit".

UAS Specify Refresher

Specifies which party will refresh the active session if the device receives

inbound calls. If it is set to “UAC”, the remote party will refresh the active

session. If it is set to “UAS” and the remote party does not support refresh

feature, the device will refresh it. The default setting is "UAC".

Caller Request Timer

Sets the caller party to act as refresher by force. If set to "Yes" and both

party support session timers, the device will enable the session timer

feature when it makes outbound calls. The SIP INVITE will include the

content “refresher=uac”. The default setting is "No".

Callee Request Timer

Sets the callee party to act as refresher by force. If set to "Yes" and both

parties support session timers, the device will enable the session timer

feature when it receives inbound calls. The SIP 200 OK will include the

conte

nt “refresher=uas”. The default setting is "No".

Force Timer

Configures the session timer feature on the device by force.

•

If it is set to "Yes", the device will use the session timer even if the

remote party does not support this feature.

•

If set to "No", the device will enable the session timer only when the

remote party supports this feature. To turn off the session timer, select

Summary of Contents for GAC2570


















































































































































































Search results

Summary of Contents for GAC2570

Reviews:

Related manuals for GAC2570

Brands by name

Popular brands

Grandstream Networks GAC2570, User Manual

Search results

Summary of Contents for GAC2570

Reviews:

Related manuals for GAC2570

Brands by name

Popular brands