
GAC2570 User Manual
Version 1.0.1.23
P a g e
|
147
Use NAT IP
Configures the IP address for the Contact header and Connection Information in the
SIP/SDP message. It should ONLY be used if it’s required by your ITSP. By default, the
box is blank.
UAC Settings
UAC Audio
Mode
Select the audio parameters to be used in UAC mode. It only takes effect in UAC mode.
▪
Select "Normal", it will be compatible with most scenes.
▪
Select "Zoom Room PC", it will be fully adapted to Zoom meeting on the PC.
▪
Select "Microsoft Teams PC", it will be fully adapted to Microsoft Teams meeting on
the PC.
Call Settings
Enable Direct IP Call
Mode
Configures enable/disable direct IP call mode of the GAC2570. If set to
"Yes", the feature of direct IP call will be enabled.
Enable Paging Call
Mode
Configures enable/disable paging call mode of the GAC2570. If set to
"Yes", the feature of paging call will be enabled.
Enable Call Waiting
Enables call waiting feature. If it is disabled, the GAC2570 will reject the
second incoming call during an active session without user’s knowledge.
But this missed call record will be saved to remind users. The default
setting is checked (enabled).
Enable Call Waiting Tone
Sets the GAC2570 to play the call waiting tone along with LED indicator if
there is another incoming call. If unchecked, only LED will indicate another
incoming call. The default setting is checked (enabled).
Enable DND Reminder
Ring
Enables the DND reminder ring. If set to "Yes", the ring splash that
indicates an incoming call when DND is enabled will be played. Default
setting is “Yes”
Auto Mute on Entry
Configures whether to mute the call on entry automatically.
•
If set to "
Disable
", then do not use auto mute function.
•
If set to "
Auto Mute on Outgoing Call
", then mute automatically
when the other party answers the outgoing call.
•
If set to "
Auto Mute on Incoming Call
", then mute automatically
when answers the incoming call; If set to "
Mute on Incoming &
Outgoing Call
", then mute automatically when the call gets through.
Note:
This function only take effect when the GAC2570 is from the idle
status to call status. Users could click the Mute button on call interface to