
GAC2570 User Manual
Version 1.0.1.23
P a g e
|
162
•
If set to "
No
", then users can manually configure the path and update
mode for the configuration file server.
Config Upgrade Mode
Selects provisioning method: TFTP, HTTP or HTTPS. Default setting is
“HTTPS”.
Config Server Path
Sets IP address or domain name of configuration server. The server hosts
a copy of the configuration file to be installed on the device. Default is
“fm.grandstream.com/gs”.
HTTP/HTTPS Username
Configures the username for the config HTTP/HTTPS server.
HTTP/HTTPS Password
Configures the password for the config HTTP/HTTPS server.
Config File Prefix
Checks if configuration files are with matching prefix before downloading
them. This field enables user to store different configuration files in one
directory on the provisioning server.
Config File Postfix
Checks if configuration files are with matching postfix before downloading
them. This field enables user to store different configuration files in one
directory on the provisioning server.
Authenticate Conf File
Sets the device to authenticate configuration file before applying it. When
set to “Yes”, the configuration file must include value P1 with GAC2570
system’s administration password.
If it is missed or does not match the password, the device will not apply it.
Default setting is “No”.
XML Config File
Password
Decrypts XML configuration file when encrypted. The password used for
encrypting the XML configuration file is using OpenSSL.
Provision
Automatic Upgrade
Automatic Upgrade
Specifies when the firmware upgrade process will be initiated; there are 4
options:
•
No
: The device will only do upgrade once at boot up.
•
Check every day
: User needs to specify “Hour of the day (0-23)”.
•
Check every week
: User needs to specify “Hour of the day (0-23)”
and “Day of the week (0-6)”.
•
Check every interval:
User needs to specify “Hour of the day (0-
23)”
Note
: Day of week is starting from Sunday. The default setting is “No”.
Automatic Upgrade
Check Interval (m)
Specifies the time period to check for firmware upgrade (in minutes).
The default setting is 10080.