GAC2570 User Manual
Version 1.0.1.23
P a g e
|
78
4.
Tap on
to send the number. If no key is pressed, by default the call will be automatically dialed
out after 4 seconds timeout.
Notes:
•
By default, the "No Key Entry Timeout" is 4 seconds, meaning if no key is pressed after entering a
number, the call will be automatically sent out after the timeout. The timeout interval can be configured
under web GUI
→
Account
Settings
→
Account X
→
Call Settings
.
•
GAC2570 allows users to press # key as SEND key. This behavior can be disabled via option "Use #
as Dial Key" under web GUI
→
Account
Settings
→
Account X
→
Call Settings
.
•
When the user enters the digit on the dial screen, if there is digit matching call history, or contacts
name/number, the drop-down list will show the numbers. For example, if "John" is saved in the contacts,
entering 5 (JKL) 6 (MNO) 4 (GHI) 6 (MNO) will show call log with 5646 as the first four digits, as well
as John's number. Users could then directly select one of them from the list, instead of entering all the
digits.
Redial
Users can dial out the last dialed number if there is dialed call log, using the same SIP account making the
call last time.
1.
Enter the dial screen.
2.
A list of dialed calls will be displayed on the left side of the dial pad. Tap on the number you would like
to call, the number will be added to the dialing field, press call to redial.
Dial a Number via Contact
Follow the steps below to dial a number via Contact.
1.
Access Contacts by tapping on
icon on the left side of the idle screen.
2.
Navigate in the contacts entries by sliding up/down on the screen.
3.
Tap on the dial icon for the contact
.
