Hose Reel Reassembly
20
332203F
Refer to these two figures to verify swivel (3) is
properly oriented and installed on the correct
side of the spool (2).
NOTE:
Always
compare your swivel installation
to the illustrations in F
IG
. 27 before permanently
installing the ratchet (31) and bolts (4). When
the swivel (3) is correctly installed in the correct
side of the spool, the swivel orientation will
EXACTLY match the Top View, Correctly
Installed Swivel and Outlet illustration as shown
with the swivel facing UP.
If the swivel (3) is incorrectly installed in the
spool (3) the reel will not function properly.
2. Install Ratchet.
a.
Slide ratchet (31) over swivel (3) (F
IG
. 29).
NOTE:
When the ratchet is positioned correctly,
all 5 bolt holes will be accessible. If you do not
have 5 holes available to accommodate all 5
bolts, rotate the ratchet until all 5 holes are
open.
b.
Install bolts (4) to secure ratchet (31) to spool
(F
IG
. 30). Before tightening bolts, verify swivel
(3) is installed in the correct orientation as
shown in F
IG
. 27, page 19. Wrench tighten
bolts. Then torque to 25 to 35 ft. lbs (33.9 to
47.45 N.m).
3. Install shaft (11) inside spool (2) using
bolts (9) (F
IG
. 31).
Wrench tighten bolts. Then
torque to 25 to 35 ft. lbs (33.9 to 47.45 N.m).
4.
Lay spool on a flat surface or table - inlet side down.
NOTE:
Protect surface by wrapping it with black
electric tape.
F
IG
. 29
31
3
F
IG
. 30
F
IG
. 31
31
4
11
2
9