Hose Reel Disassembly
332203F
15
12.Unwind reel to remove hose from spool.
NOTE:
•
Because the spring is no longer installed on the
reel, the hose should pull off the reel very easily.
•
In some procedures you do not have to remove the
spring before taking the hose off the reel. Hose
removal instructions when the spring is installed on
the reel are provided on page 27.
13. Remove bolts (37) and outlet (30) from spool (F
IG
.
13).
NOTE:
•
The hose does not have to be removed from the
outlet unless your are replacing the hose. Hose
replacement instructions are provided in
Removing and Installing New Hose on Reel on
page 27.
•
The outlet (30) will not fit through the roller
guides. Pull the dispense end of the hose
through the rollers as shown in F
IG
. 14 to
remove hose from the reel.
14.Remove spring side bearing retainer (7),
spacers (15) and bearing (8).
a.
Remove nuts (38) (F
IG
. 15).
b.
Insert a flat blade screw driver under the
retainer (7) to pry it up and remove it (F
IG
. 15).
c.
Remove spacers (15) and bearing (8).
15. If you are not replacing these parts, set them aside
for use for reassembly.
F
IG
. 13
30
37
F
IG
. 14
F
IG
. 15
38
7