Hose Reel Disassembly
332203F
17
c.
Remove bearing retainer (5).
NOTE:
Be careful when you remove the bearing retainer
(5) that the bearing balls (35) do not fall out (F
IG
. 20).
If you are only replacing the Medium Pressure Bear-
ing, stop disassembly instructions here.
Medium Pressure Bearing Kit: 24R071 is available
from Graco. Reassembly instructions begin with
Step 5b page 21.
d.
If you are not replacing the Medium Pressure
bearing, set these parts aside to use for reas-
sembly.
Low Pressure Hose Reels Inlet Side Bearing
Removal
a.
Use a snap ring pliers to remove snap ring (41)
(F
IG
. 21).
b.
Slide bearing seal and retainer assembly (49)
off shaft (F
IG
. 22).
If you are only replacing the Low Pressure Bearing,
stop disassembly instructions here.
Low Pressure Bearing Kit: 24R070 is available from
Graco. Reassembly instructions begin with Step 5b
page 21.
c.
If you are not replacing the low pressure bear-
ing, set these parts aside to use for reassembly.
21.Remove bolts (4) holding ratchet (31) to
spool (F
IG
. 23).
F
IG
. 20
NOTICE
Be careful not to scratch or score the surface of the (a)
when using the snap ring pliers to remove the snap ring
(41). Damage to this surface could result in fluid leak-
age. Protect the surface by wrapping it with black elec-
tric tape.
42
35
5
F
IG
. 21
F
IG
. 22
F
IG
. 23
41
a
49
31
4