Maintenance
48
313875J
Install Upgrade Tokens
NOTE:
The Motor Control Module, Fluid Control Mod-
ule, and Temperature Control Module connection to the
system is temporarily disabled during the installation of
upgrade tokens.
To install software upgrades:
1.
Use correct software token stated in the table. See
Graco Control Architecture
™
Module Programming
manual for instructions.
NOTE: Upgrade all modules in the system to the
software version on the token, even if you are
replacing only one or two modules. Different soft-
ware versions may not be compatible.
All data in the module (System Settings, USB Logs,
Recipes, Maintenance Counters) may be reset to
factory default settings. Download all settings and
user preferences to a USB before the upgrade, for
ease of restoring them following the upgrade.
See manuals for locations of specific GCA compo-
nents.
The software version history for each system can be
viewed in the technical support section at
www.graco.com.
Token
Application
16G365
VPM:
- Advanced Display Module
- Motor Control Module
- High Power Temperature Control Module
- Communication Gateway Module
16G407
Ratio Monitoring (Flow Meters)
:
- Fluid Control Module
F
IG
. 14: Remove Access Cover
r_257396_3b9905_04b
ti12334a1
ti12354a1
Summary of Contents for VPM 12
Page 9: ...A Red and B Blue Components 313875J 9...
Page 50: ...Maintenance 50 313875J...
