309085
Rev. A
First choice when
quality counts.
1
2
3
TI0411
INSTRUCTIONS-PARTS LIST
INSTRUCTIONS
This manual contains important
warnings and information.
READ AND KEEP FOR REFERENCE.
200 Liter (55 Gallon) Drum Size
Hot Melt Drum Unloaders
All Models
Therm-O-Flow Plus
Maximum Operating Temperature All Models 400
F (204
C)
Senator Powered Unloaders Models A–1 and A–2
Maximum Fluid Working Pressure 1900 psi
(13 MPa, 131 bar)
Maximum Air Inlet Pressure 100 psi (0.7 MPa, 7 bar)
Bulldog Powered Unloaders Models A–3 and A–4
Maximum Fluid Working Pressure 3100 psi
(21 MPa, 213 bar)
Maximum Air Inlet Pressure 100 psi (0.7 MPa, 7 bar)
King Powered Unloaders Models A–5 and A–6
Maximum Fluid Working Pressure 3900 psi
(26 MPa, 269 bar)
Maximum Air Inlet Pressure 90 psi (0.6 MPa, 6.2 bar)
Refer to page 2 for the Table of Contents.
Refer to Graco Form 309180, Installation and
Operation Guide for installation and operation
instructions.
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441
COPYRIGHT 2000, GRACO INC.
Graco Inc. is registered to I.S. EN ISO 9001
Summary of Contents for Therm-O-Flow Plus
