Setup
20
3A2091B
Filter Orientation
1.
Use a hammer to loosen the large jam nut on the
pump assembly.
2.
Rotate the filter assembly to the desired orientation
and use a hammer to tighten the jam nut and lock
the assembly into place.
Hose Routing
NOTE:
If tow vehicle is a pick-up, remove tailgate.
1.
Pull gun arm beam out to one side of the vehicle.
Pull gun arm out and lower it to make sure the hose
bundle has been secured at the proper location to
ensure full movement for the gun arm to move from
one side to the other. Make adjustments as needed.
2.
Lift gun arm back to the stow position. Pull gun arm
beam out to other side of vehicle and pull the gun
arm to that side to ensure the hose location is ade-
quate for full movement.
3.
Put gun arm back to the stow position and pin it into
place. Center the gun arm beam to the vehicle. Lock
the gun arm beam and gun arm into place by
engaging the clamps for each.
NOTICE
Never allow hoses to touch the ground during opera-
tion. Damage to hoses will occur. Attach a tie-down
strap across the truck bed and lay excess hose on top
of the strap to suspend excess hose length.
ti16782a
ti16784a
ti16783a
ti18151a
ti18276a
ti18277a
ti18156a
Underside View