Setup
14
3A2091B
2.
Connect trailer to ball mounts:
a.
Back tow vehicle into trailer and align ball
mounts with trailer arms.
b.
Crank trailer arm jacks to clear ball mounts.
c.
Move tow vehicle backward and align ball
mounts under trailer arms.
d.
Crank trailer arm jacks to lower RoadPak trailer
arms onto ball mounts.
e.
Secure safety pins (A) for both trailer arm cou-
plers and connect safety chains.
f.
Connect safety chains.
g.
Rotate jack to horizontal position. Insert safety
pins into place to secure jacks.
3.
Shorten each safety chain:
a.
Unscrew nut fastening chain to RoadLazer.
b.
Refasten chain to RoadLazer so it connects to
tow vehicle with minimum slack.
4.
Connect wires for lights.
5.
If trailer is still attached to shipping pallet, remove
straps and tow trailer off of pallet.
Trailer Tires
Trailer tires can cause noticeable vibration when out of
balance. For extended highway use Graco recommends
adding 1 oz. of Dyna Beads
®
to each wheel. Dyna
Beads and installation instructions can be found at:
www.innovativebalancing.com.
ti18139a
ti18140a
ti18142a
A
ti18141a
