Setup
18
3A2091B
5.
Hand-tighten two mounting nuts but allow enough
movement to make slight adjustments once in place.
6.
Connect safety switch wires.
7.
Swing gun arm up and align stow plate in channel of
stow bracket. Slide gun arm towards center of stow
bracket until safety switch aligns with stow bracket
as shown.
NOTE:
Be sure that the hose bundle
does not become caught or pinched when moving
gun arm.
8.
Measure gap between safety switch and stowing
bracket.
NOTE:
If gap is less than 0 in. or greater
than 3/16 in. (4.7 mm) use a mallet to tap stowing
bracket to create a proper gap. Move safety switch
away from this area when adjusting gap.
9.
Align hole in stow bracket with slot in stow plate.
install safety pin.
10. Align safety switch bracket so safety switch is
aligned with stowing bracket as shown and tighten
nuts.
NOTICE
Use cable ties to secure wires to gun arm. System will
not operate if wires become damaged.
ti18148a
ti18152a
ti18154a
ti18158a
ti18157a
ti18159a
