![background image](http://html.mh-extra.com/html/graco/roadlazer-roadpak-16n437/roadlazer-roadpak-16n437_operation-manual_2250957011.webp)
Hitch Receiver Kit: 238944 (Standard)
3A2091B
11
Hitch Receiver Kit: 238944 (Standard)
Installation Instructions for Hitch Kit 238944 (straight cross tube)
1.
Have a DRAW-TITE
®
Class IV Ultra-Frame tow
hitch (or equivalent hitch with a 7500 lb (3401 kg)
GTW rating and 3 in. x 3 in. (7.6 cm x 7.6 cm)
square cross tube) installed on your vehicle (refer-
ence DRAW-TITE
®
part no. series 419XXX).
2.
Both of the Graco clamp-on receivers must be 18 in.
from the center of the hitch frame (A).
3.
Attach the left hitch receiver (3) to the trailer hitch
with three of the supplied screws (1) and nuts (2).
NOTE:
Pre-torque each of the screws to set the
hitch receiver in place.
4.
Repeating the process from step 2, attach the right
hitch receiver (4) to the trailer hitch with the three
remaining screws (1) and nuts (2).
5.
Verify that the centers of the hitch receivers are 36
in. (91 cm) apart. Make any necessary adjustments.
6.
Torque all of the screws to 220-240 ft-lb (298-325
N•m).
Torque to 220-240 ft-lb (298-325 N•m)
DRAW-TITE
®
Class IV Ultra-Frame tow
hitch is not included. Cross tubes must be
3 in. x 3 in. (7.6 cm x 7.6 cm) square.
1
2
Ref.
Part
Description
Qty.
1
113665 SCREW, cap, hex head,
grade 8; 5/8-11 unc-2a;
4.5 in. (11.4 cm)
6
2
113980 NUT, lock, hex, grade 8;
5/8-11 unc-2b
6
1
2
NOTE:
For the nearest DRAW-TITE
®
installer call 1-800-428-7303
7246c
36 in.
18 in.
2
1
A