![background image](http://html.mh-extra.com/html/graco/gm-3500/gm-3500_instructions-and-parts-list_2250920042.webp)
2
Page 20:
In Fig. 17, change Note 1:
from: Torque: 70 ft–lb (90 N.m)
to:
Torque: 90 ft-lb (115 N
m)
Page 29:
In step 8., change:
from: Pull the engine recoil rope to assure the engine
turns freely, and there is no friction between the
rotor (4b) and the field (6). If there is friction, loosen
the setscrews (12) and reposition the field as
necessary. Tighten the setscrews oppositely and
evenly to 25ft–lb (2.8 N.m). Also make sure there
are no burrs on the outside edge of the rotor.
to:
After installing the rotor (4b), check the clearance between the
outside diameter of the rotor and the inside diameter of the field (6). The
clearance must be .006 in. (.15 mm) minimum all the way around. Use a
piece of .006 in. brass shim stock to check. If necessary, loosen the field
setscrews (12), adjust the position of the field and then tighten the
setscrews.
Page 39: In
the Technical Data section, change:
from: Engine
3.5 Horsepower, Honda
. . . . . . . . . . . . . . . .
to:
Engine
4.0 Horsepower, Honda
. . . . . . . . . . . . . . . .
from: Maximum delivery
0.85 gpm (3.2 liter/min)
. . . . . .
to:
Maximum delivery
1.0 gpm (3.8 liters/min)
. . . . . .
31 Jul 96
3X7–863 Page 2