25
307-863
Engine
NOTE: The engine must be removed before the Field,
Clamp or Clutch Housing can be removed.
1.
Working under the mounting plate (A) of the cart,
remove the screw (15), lockwasher (80) and wash-
er (34) which hold the clutch housing (2) to the
cart. See Fig. 24.
2.
Still working under the mounting plate, remove the
two locknuts (61 or 100) and lockwashers (9), and
then pull the screws (14) out of the base of the
engine. Disconnect the red wire from the engine
lead (B). Disconnect the black and white wires (29)
from the field. Pull the wires carefully through the
grommets (66) before removing the engine. See
Fig. 24 and 25.
3.
Lift the engine carefully and place it on a work
bench.
4.
Remove the Field and Wiring Harness, Clamp
and Clutch Housing, as instructed on pages 26
and 27.
5.
Skip ahead to Reassembly, page 28, Step 1.
NOTE: All service to the engine must be performed by
an authorized HONDA dealer.
Fig. 24
34
80
15
10
11
2
9
61 or 100
66
14
B
29
A
Fig. 25
View from under engine mounting
plate on upright cart
32
View from under engine mounting
plate on lo–boy cart
WHITE
61,9
RED
BLACK
9,62
29
29
66
66
32
RED
WHITE
BLACK
66
0147
0146
1
2
To field
To engine
1
2
1
2
