Maintenance
24
3A6941B
Maintenance
Disassemble
1.
Relieve pressure, following the
, page 6.
2.
Disconnect the power to the system.
3.
Loosen and remove the four bolts (3) holding the
motor (1) to the pump, then remove the motor (1)
and the o-ring (2) (F
4.
Loosen and remove the four bolts and four washers
holding the pump to the tank (41) with a 5 mm Allen
wrench (F
. 25).
5.
Pull the pump out of the tank (41).
6.
Remove the pressure relief valve cartridge (5) (F
7.
Remove the two bolts (6) and two nuts (not shown)
from the protection cover (8) (F
8.
Remove the protection cover (8).
F
IG
. 24
F
IG
. 25
1
2
3
41
47
48
F
IG
. 26
F
IG
. 27
5
8
6
Summary of Contents for Compact Dyna-Star
