![background image](http://html.mh-extra.com/html/graco/309028zat/309028zat_instructions-manual_2251521044.webp)
Pneumatic Logic Panel Service
44
309028ZAT
Pneumatic Logic Panel Service
Filter/Element Replacement
Listed below are the filters used with the ram assembly
on the Uni-Drum Supply System.
•
The Main Air Filter (N) between the air supply
source and both air motors. See F
. 22.
•
The Pneumatic Panel Air Filter (F) between the air
supply source and the Pneumatic Logic Panel (G).
See F
To replace an air filter/element, perform the following
steps:
1. Follow the
on page
2. At the Junction Box Panel (H), verify that the
SYSTEM PRESSURIZED and
RAM READY lights
turn off.
Filter Removal
3. Turn the air filter counterclockwise to unscrew the
filter from its mounting.
Filter/Element Replacement
4. Replace the old air filter element with a new filter
element.
5. Clean the sight glass, if necessary. Reinstall the
sight glass back on its threaded mounting. Tighten
the sight glass.
6. Perform the
procedure on
page 33.
7. Check for air leakage around the filter.
8. Return the system to previous operation settings.
F
IG
. 22
Ti20917a
N
F
IG
. 23
F
Summary of Contents for 309028ZAT
