![background image](http://html1.mh-extra.com/html/graco/234129/234129_instructions-manual_2251484099.webp)
Typical Dispense Cycle
309738L
99
Typical Dispense Cycle
The
In Cycle
signal is set at the beginning of a dispense cycle, which starts with a Dispense Gun signal from the
automation unit.
Bead Control / Vol. Monitor / Pressure Control
Using I/O for Job End
A = Regulator On Delay
B = Regulator Off Delay
C = Gun On Delay
D = Gun Off Delay
E = Minimum delay between regulator / valve closing is 10 msec
F = The minimum pulse width for the Job Complete signal is 20 msec
F
IG
. 38
Dispense Gun
Input Signal
Regulator
On
A
B
C
D
F
Valve
On
Job Complete
Input Signal
In Cycle
Output Signal
E