![background image](http://html1.mh-extra.com/html/graco/234129/234129_instructions-manual_2251484020.webp)
Installing Fluid Metering Assembly
20
309738L
Installing Fluid Metering Assembly
To install the fluid metering assembly hardware:
•
Install the PrecisionFlo LT fluid metering assembly.
•
Connect the PrecisionFlo LT fluid metering assembly
to the control assembly.
•
Connect fluid lines and cables.
Installing the Fluid Metering Assembly
Preparing to Install the Assembly
Before installing the fluid metering assembly:
•
See component manuals for specific data on compo-
nent requirements. Data presented here pertains to
the PrecisionFlo LT fluid metering assembly only.
•
Have all system and subassembly documentation
available during installation.
•
Be sure all accessories are adequately sized and
pressure-rated to meet the system's requirements.
•
Use only the Graco PrecisionFlo LT fluid metering
assembly with the PrecisionFlo LT control assembly.
Installing the Assembly
1.
Select a location for the PrecisionFlo LT fluid meter-
ing assembly. Keep the following in mind:
•
Allow sufficient space for installing the equipment.
•
Make sure all fluid lines, cables and hoses easily
reach the components to which they will be con-
nected.
•
Make sure the fluid metering assembly allows the
automation unit to move freely along all axis.
•
Make sure the fluid metering assembly provides
easy access for servicing its components.
2.
Locate and secure the PrecisionFlo LT fluid meter-
ing assembly to the automation unit (or other mount-
ing surface) with appropriate size bolts through the
0.42 in. (10.7 mm) diameter holes in the base plate.
See the mounting dimensions in
and F
Table 1 - Measurement, inches (mm)
WARNING
Read Warnings, page 6.
WARNING
Read Warnings, page 6.
A
16.0 (407)
B
15.0 (381)
C
11.0 (280)
D
8.0 (204)
F
IG
. 8
"
"
A
B
D
C