![background image](http://html1.mh-extra.com/html/graco/234129/234129_instructions-manual_2251484073.webp)
Technical Data
309738L
73
Technical Data
*Flow rates and viscosities are general estimates. Flow rates drop as viscosity increases. Fluids are expected to
shear under pressure. New applications or fluids should always be tested to determine proper line sizes and equip-
ment selections.
See your Graco Authorized distributor for other capabilities.
*Minimum Flow Rates
38 cc/minute with G3000HR meter
75 cc/minute with G3000 meter
50 cc/minute with High Resolution Helical flow meter
100 cc/minute with Helical flow meter (ambient/heated)
*Maximum Flow Rates
1900 cc/minute with G3000HR meter
3800 cc/minute with G3000 meter
3750 cc/minute with High Resolution Helical flow meter
7500 cc/minute with Helical flow meter (ambient/heated)
Maximum Fluid
Working Pressure
See
Minimum Fluid
Working Pressure
At Regulator Outlet ......... 500 psi (3.5 MPa, 34.5 bar)
Minimum Back
Pressure
Between Regulator Outlet and Dispense Nozzle ...... 500 psi (3.5 MPa, 34.5 bar)
Air Supply Pressure
Range
60-120 psi (.4 - .8 MPa, 4.1- 8.3 bar) - 10 Micron filtration recommended
Fluid Filtration
Required
30 mesh (500 micron) minimum
*Viscosity Range
of Fluids
50 to 50000 cps with G3000 meter
10000 to 1000000 cps with Helical meter
*Minimum Dispensed
Shot Size
3 cc with G3000HR meter
6 cc with G3000 meter
4 cc with High Resolution Helical meter
7 cc with Helical meter
V/P Output
1 to 5 VDC provide 0 to 100 psi (.68 MPa, 6.8 bar)
Wetted Parts
Meters and Fluid Panels ..... 303, 304, 321, 17- 4 stainless steel; tungsten carbide,
PTFE, steel, Fluoroelastomer
Power Requirements
Full Load Amps - 1, Fused Amps - 2
Power Supply Voltage
Range
120 VAC nominal ..... 93 - 264 VAC, 50-60 Hz., single phase
Operating Tempera-
ture Range
Controller ..... 40° - 122° F (4° - 50° C)
Fluid Panel ..... see regulator rate technical data, page 74.
Operating Humidity
Range
0 - 90% non-condensing