31
1/4" X 30mm
Connector Bolt
Plastic End Cap
#8 X 7/8 Screw
D
Optional 4th Rail Assembly
Parts Needed: 1- 64” Rail
1- 34” Rail w/ Coupler
1- Square Plastic Cap
1- Round Plastic Cap
2- Plastic End Cap
2- #8 X 7/8” Screw
2- 4th Rail Bracket
4- 1/4 X 30mm Connector Bolt
• Attach the 4th Rail Bracket to the
Right Front Leg with the connector
bolts, as illustrated to the right.
• Follow the above instruction for the
left side.
• Take your rail and place it in between the 4th Rail
Brackets, with the square plastic cap on the left side
and the round plastic cap on the right side, as shown
left.
• Place a plastic end cap in the hole on
the outside of the Left Frame End. You
will then screw the plastic end cap to the
square plastic cap.
• Place a plastic end cap in the hole on
the outside of the Right Frame End and
use a screw to tighten the plastic end cap
to the outside of the Right Frame End.
