20
Coupler
#10 Socket Head Screw
Queen Size Rail
64" Rail
34" Rail
Ratchet Wheel
• Place a ratchet wheel on
each of the square plastic
end caps. Place two of
the ratchet wheels on the
rails so the teeth arc in a
clockwise direction and the
third rail so the teeth on the
ratchet wheel arc counter-
clockwise.
Step 16: Rails to Frame Assembly
Parts Needed: 3- Ratchet Wheels
8 - #8 7/8” Screw
8 - End Cap Shoulders
• If you are setting your frame up in the queen size, you will need to add a coupler to the end that does not have
the square end cap on the 64” Rail.
• First, insert one end of the coupler into the end of the rail. Insert a #10 socket head screw through the second
hole from the end of the rail and into the threaded hole of the coupler. Tighten this screw all the way.
• Repeat this step for the other end of the coupler, connecting it to the 34” rail.
• Note the direction in which the teeth arc on the ratchet wheel in the picture on the following page. The teeth
arc clockwise on the upper two rails and counter-clockwise on the lower rail.
**To make it easier to put your rails in you could loosen both knobs on your Left and Right Rail Mount Ends.
This will allow you to move your Rail Moutn Ends away from your frame slightly, making it easier to insert
your rails on your frame.