21
Plastic End Cap
#8 X 7/8" Screw
• Put the rails into the rail mount ends by putting the
stem of the end cap from the ratchet side of each rail
into the hole in the left rail mount end. Then force the
end cap on the opposite side of the frame into the hole
on the right rail mount end. You will have to flex the side
of the frame out a little to accomplish this. Repeat this
process for all three rails. Reference the picture to the
left for rail and ratchet wheel position.
• When all the rails are in place, put an end cap
shoulder on the end of each end cap with a
7/8” screw.
