8
Left Fabric Layers
Rail Mount End
1/4" X 1-1/2"
Carriage Bolt
3/16" Flat Washer
1/4" Jam Nut
1/4" X 1-1/2"
Carriage Bolt
3/16" Flat Washer
1/4" Jam Nut
Right Fabric Layers
Rail Mount End
Step 2: Fabric Layers Rail Mount End Assembly
Parts Needed: 1- Right and Left Fabric Layer Rail Mount End
4- 1/4” Jam Nut
4- 3/16” Flat Washer
4- 1/4” X 1-1/2” Carriage Bolt
Right Fabric Layers Rail Mount End
Inside View
Left Fabric Layers Rail Mount End
Inside View
• Place one of the carriage bolts through each of the holes on the Left Fabric Layer Rail Mount End, making sure
the head of the bolt is on the side with the L.
• Place one washer and one jam nut on the end of the bolt.
• IMPORTANT: Completely tighten the jamb nut onto the bolt until the head
of the bolt is pulled into the
counter-sunk hole.
• Repeat the above steps for the Right side.
