5
CARE OF YOUR LITTLE GRACIE
Your Little Gracie frame is a machine quilting system that can be used finished or unfinished. Most use
it unfinished with no problem, and doing so does not adversely affect warranty coverage. However, for extra
protection, or to give it a finished look, you may seal, stain and/or finish the frame using a number of different
applications. This is best done BEFORE YOU ASSEMBLE your frame.
To seal the wood, we recommend an application of tung oil or Danish Oil finish that will help preserve
the wood and will help to prevent warping. We recommend the McCloskey’s Tung Seal, Deft
TM
or Watco
TM
brands. Some prefer to use a urethane coat to add a more glossy finish.
Test stain on an inconspicuous place. Many different finishes and/or stains may be suitable for sealing
and beautifying your frame. You may want to consult your local paint retailer for finishes that are easy to apply
and dry hard–not oily.
Use and Storage Tip
--Store frame in a dry place. If not assembled, store with braces in vertical position. (This will prevent floor
moisture from seeping into the parts).
Five-Year Limited Warranty
GraceWood, Inc. will replace or repair, at our choosing, any part of the Little Gracie
Machine Quilting
System which may be shown to be defective. This warranty does not cover parts damaged through misuse,
improper storage, improper assembly, loss, natural events and willful or accidental destruction. Defective parts
may be returned only with a valid RMA# which may be obtained by calling
GraceWood, Inc. at
1-800-264-0644 or 1-801-485-6688.
NOTE: Warranty card must be filled out, stamped and mailed to the address on the card
within 30 days of
purchase.
Contact Information
For Technical Support or any other correspondence concerning your Little Gracie, call 1-800-264-0644 ~
OR ~ E-mail: [email protected] ~ OR ~ Fax: (801) 908-8888 ~
OR ~ Write to:
The Grace Company
P.O. Box 27823
Salt Lake City, UT 84127
For details on accessories and other information, see us online at
www.graceframe.com
For shipping of materials to The Grace Company address package (postage prepaid) to: The Grace Company,
2225 South 3200 West, SLC, UT 84119. Materials may be returned only with a valid RMA# or Returned
Merchandise Authorization Number which may be obtained by calling GraceWood, Inc. at
1-800-264-0644.
If you call after business hours (M-F 8:00 a.m. – 5 p.m., MST) be assured that your call will be returned
the next business day if you leave a message. Please report any errors in these instructions or make comments
to the following:
Grace Quilting Frames and Hoops: Innovation and Evolution
Grace Quilting Systems have been developed over the past two decades with several original design
innovations. Additionally, because of feedback from many of the thousands of quilters who have purchased
and use our machine quilting systems, we have been able to make a frame that will truly enhance the entire
process of machine quilting from beginning to end. If you have any suggestions that will help us to improve
our product or service, let us know, using one of the above contact methods.
