Page 2831
new right oil pump cover.
Assembly of the gearshift
mechanism
1. Install the positioning plate
combination (1) and the flat washer (2), snap
the positioning plate spring (3) into the
corresponding position of the positioning plate,
and fasten with M6
×
20 bolts (4);
2. Install the five-star plate assembly (5) on the
speed change drum, take a M6
×
35 bolt (6),
apply 3 to 4 threads of thread tightening glue
on the thread , and fasten the bolt;
3. Take the NC250 shift arm assembly (7) and
put it into the corresponding position (note: the
shift arm return spring is clamped into the right
shift arm positioning bolt);
4. Test whether the shifting is correct and
smooth.
5. Take the oil seal (8) of the LY350
reverse gear shift drum and install it on the oil
seal hole of the left shift arm with a tooling
Assembly of the right body oil
pump
1. Pass the oil pump shaft (1)
through the corresponding hole of the
box;
Note: There are 2 pin holes on the
shaft facing the right case
2. Pass the oil
pump pin
(2) through
the oil pump shaft (1), and then install
the oil pump rotor assembly (3) into the
1
0
8
12
13
1
4
1
5
1
6
1
7
1
8
19
2
0
2
1
23
2
2
25
2
4
26
27
2
9
2
8
3
1
32
30
