Page 2431
the oil pump gear combination;
2. Remove the oil pump bridge tooth
washer, the oil pump bridge tooth, and the oil
pump gear combination;
3. Remove the 3 bolts M5
×
18 on the
cover plate of the right oil pump, and remove
the combination of the oil pump cover plate
and the combination of the inner and outer
rotors of the oil pump.
Notice:
There are one oil pump bridge tooth
washer on the top and bottom of the oil
pump bridge tooth. The removed
retaining ring, washer and oil pump pin
should be properly kept to avoid loss
.
Disassembly of the double
gear
First remove the double gear shaft, then
remove the first double gear and the second
double gear.
Removal of starter motor
Remove the starter motor fastening screws
M6
×
25, and take off the starter motor.
Removal of the gearshift
mechanism
1. Remove the M6
×
35 fixing screws of
the five-star board, and remove the five-star
board
2. Remove the shift arm parts;
3. Remove the M6
×
20 fixing screws of
the positioning plate combination, and remove
the positioning plate washer and the
positioning plate combination.
Bolt M6
×
25
Bol tM6
×
35
Five-star board
shift
arm
parts
"Location
plate
combination
Bolt M6
×
20
"NJK" mark
water pump impeller
