Page 2331
1. Remove the water pump impeller (8)
and the water pump shaft (9);
2. Remove the water seal assembly (10)
and oil seal (11) in the shaft hole of the water
pump.
clutch removal
1. Remove the clutch pressure plate spring
and bolts, pay attention to loosening the clutch
pressure plate bolts in two or three times in a
cross manner;
2. Remove the clutch pressure plate and
the clutch ejector rod;
3. Remove the clutch lock nut and thrust
washer;
4. Remove the clutch center sleeve, outer
cover, needle bearing and gasket;
5. Take out the clutch push rod in the
center hole of the main shaft.
Dismantling of driving gear,
super-detachment and starting large gear
1. Remove the drive gear lock nut and the
lock nut washer;
2. Remove the driving gear, super-separate
and start the big gear.
Notice:
When removing the starter gear
assembly, remove the washer under the
starter gear together, and keep the
washer in a safe place.
Removal of the right body oil
pump
1. Use the expansion pliers to remove the
retaining ring of the oil pump bridge gear and
Drive tooth
lock nut
Active tooth
Start the big
gear
Overrunning
clutch
oil pump pin
double
tooth two
Double gear shaft
Needle Roller Bearings
垫片
washer
retaining ring
Bridge tooth
washer
M5
×
18
Oil pump cover plate
combination
oil
pump
pin
