Device Description HG G-98780-A | English, Revision 16 | Date: 15.07.2021
16
Chapter 5 – Components and Operation
5.2.2 HG G-98780YA/XA (with Profibus and RS232/RS422)
5.2.2.1 Dimensions
Figure 7
Outline of antenna HG G-98780YA/XA (including housing dimensions and picture of
the terminating resistor / Terminator)
Antenna and interpreting electronics are housed in a 360 x 160 x 91 mm casing.
The reading side of the antenna is the top of the casing with the casing cover. The
three 12 pin built-in connectors (M23; gold-plated contacts) are facing in the direc
-
tion of travel. For each antenna, a correspondingly suitable line termination resis
-
tance is included in the scope of supply.
Inside the casing are the completely sealed antenna electronics and the heater. For
connecting the antenna, the female connectors X1 and X2 (Profibus) or the male
connector X3 (PosiPuls, RS232, power supply) are being used. The integrated LED
is lit for the Profibus status
Data exchange
.
For each antenna of this variant a connection set HW CONSET00001 will be sup
-
plied, including 3 connectors, the terminating resistor and an inserter tool.
Those
sets are pre-configured for cable diameters of 7 — 12 mm
2
. If the actual
cable diameters do not match the pre-configured values the actual cable
diameters have to be indicated on order.
Reading
side
(casing cap)
Mounting
side
(with mounting drill holes)
Terminating resistor
X1
X3
X2
female
female
male
