![Gotting HG 98860ZA Technical Description Download Page 33](http://html1.mh-extra.com/html/gotting/hg-98860za/hg-98860za_technical-description_2247533033.webp)
Software
English, Revision 04, Date: 19.01.2015
33
5.3.2.1
Main menu
Figure 17
Main menu of the monitor program
Each of the monitor menu windows contains important system variables in the upper
four lines (also refer to Table 12), as they also appear in the output telegram (described
in section 4.2.3.1.1 on page 18). The bottom line on the screen contains possible sta-
tus messages, e. g. if allowed values ranges were not obeyed during input.
Description of the system variables
S
Measured voltage of the sum coil in units (max. 1023)
D
Measured voltage of the positioning coil in units (max. 1023)
D_Y [mm]
Transponder position rectangular to the direction of travel in milli-
meters (max. ±750, 32767 when position invalid)
D_X [mm]
Transponder position in direction of travel in millimeters
(max. ±300, 32767 when position invalid)
Code
The 32 data bits of the Transponder in hexa decimal coding. The
code is recorded as soon as voltage
S
exceeds the
Threshold
for Positioning
(refer to Figure 20 on page 37)
Read
The number of code readings per Transponder crossing (max.
255). This value is being stored until a new Transponder code
has been detected. May be deleted by noise
N
Number of reading errors per Transponder crossing. This value
is stored until a new Transponder has been detected
Table 12
Description of system variables (monitor program) (part 1 of 2)
S:0005 D:+005 D_Y:+32767 D_X:+32767 Code: 0000 Read: 0: N: 1
Frx[/Hz]:61280 Ftx[/Hz]:127990 CSEL: 1
U[/mV]:24200 I[/mA]: 340 T[Grd.C]:+14 S_MA: 8002 S_SL: 0000 Noise 0
(S)erial Output
(T)ime & Code
(F)requency & Antenna tuning
Basic C(A)N-Parameters
CA(N)-Open-Parameters
(D)isplay Systemstatus
Cs(v) [38,4 KB Code,Us,Ud,X,Y,Tr,Co,Pos,N,E,Cnt<crlf>] (abort with <a>)
display Histogram: (X) AbsValues, (-)SignedValues
display Histogram: (Y) AbsValues, (+)SignedValues
[L]oad Userparameters to EEProm
[U]pdate Firmware
(1) Import User Parameter from Host to Antenna
(2) Export User Parameter from Antenna to Host
P(r)int Parameters
{3} Service Menu
Software Version 98860MA1.02 / 15.NOV.2013 Serial Number: 123456