Gotharman Anamono User Manual Download

Page: 8 / 96

Anamono Back / Connections

9VDC:

Connect the supplied 9-12 VDC power adaptor to the socket. The switch near it are

the power on/off switch. If your Anamono wasn’t delivered with a power adaptor, or you
need to replace it, it has to be:
-A 9-12 V DC, min. 500 mA unregulated power adaptor with a 2.1 mm DC connector, with
the positive voltage in the middle.

MIDI in:

Connect this to the MIDI out of a MIDI transmitting device (MIDI keyboard,
sequencer, computer or whatever).

Audio In jack:

This is the external audio input of Anamono. Connect any line-level audio

source to this, to process it with Anamono’s powerful audio system.

Audio Out jack:

This is a line output, and needs to be amplified. Connect it to an amplifier

or a mixer.

Summary of Contents for Anamono
































































































Search results

Summary of Contents for Anamono

Reviews:

Related manuals for Anamono

Brands by name

Popular brands

Gotharman Anamono, User Manual

Search results

Summary of Contents for Anamono

Reviews:

Related manuals for Anamono

Brands by name

Popular brands